Torque Traceability Software Demo: Every Fastening, Every Vehicle
1:08Published 23 Sept 2026 CaptionsSynthetic narration
A narrated walkthrough of MileSoft's torque traceability software: multi-brand controllers on one network, line, controller and model masters with torque limits, OK and not-OK results for every joint, and a buy-off print for each vehicle.
Transcript
Narration is a computer-generated voice (Kokoro-82M text-to-speech) reading this transcript. Screens are captures of the software; client names and data in them have been replaced.
0:00Architecture
Here is how MileSoft's torque traceability software records every fastening on the line against its standard and its vehicle.
Every torque controller on every line, whatever its make, reports over the plant network to one central system.
0:15Line master
Assembly lines are set up once: chassis, final, power train and trim.
0:20Controller master
Each controller is registered with its IP address and port, the line and stage it sits on, and its make.
0:27Model code master
Each model and variant carries its own code, and a standard torque with control and specification limits for every controller and stage.
0:36Live data collection
As fastenings happen, every reading is collected from controllers of different makes and compared with its standard.
Each joint is marked OK or not OK, so a fastening outside its limits cannot pass unnoticed.
0:49Buy-off print
At line buy-off, each vehicle gets a print: its identification and body numbers, and every joint's set value, actual value and result.
Every fastening, from any make of controller, recorded against its standard and its vehicle. Book a live demo at milesoft.net.
