FCU Selection Software Demo: Rating Fan Coils Zone by Zone
1:27Published 23 Sept 2026 CaptionsSynthetic narration
A narrated walkthrough of MileSoft's fan coil unit selection software: project setup, unit specification, selection at each zone's entering air and water conditions, the bulk selection list, and a selection report for every unit.
Transcript
Narration is a computer-generated voice (Kokoro-82M text-to-speech) reading this transcript. Screens are captures of the software; client names and data in them have been replaced.
0:00Project log
Here is how MileSoft's FCU selection software rates a fan coil unit at the conditions each zone actually sees.
Every saved selection sits in one project log, with its customer, quantity and mode of selection, and exports to Excel.
0:16Project information
A project records the customer, country, consultant and sales manager.
Units are set once for the project: airflow, face velocity, flow rate, fin spacing, temperature and capacity.
0:28Unit specification
The specification fixes how the units are built: construction, casing, and the drain pan and its insulation.
Then power supply, fan and motor, filter, and coil coating and insulation.
0:40Unit selection
Selection starts from the unit tag and quantity, then series, model, external static pressure and fan speed.
Each unit is rated at the zone's own entering air condition and water temperatures.
Calculate returns total and sensible capacity, power, specific fan power and the water pressure drop.
Each result joins the selection list, which prints or exports for every unit at once.
1:07Selection report
Every unit prints as a selection report: model and airflow, cooling and sensible capacity, the water side, and the coil, drain pan, filter and motor construction.
Rated at real zone conditions, in bulk, with a report for every unit. Book a live demo at milesoft.net.
